Iimveliso
ISODIUM NAPHTHALENE SULPHONAT SNF-A,B,C
SNF-AI-SUPERPLASTICIZER EPHAKAMILEYO
(I)IPROPATI,IIMPAWU&IIMPAWU(FDN-A)
1. Imbonakalo:Umgubo omdaka okhanyayo&ulwelo olumdaka omnyama.Ayinatyhefu, ayinavumba, ayinakutsha kwaye ayidleki kwiintsimbi zentsimbi.
2. IPlastiki ephawulekayo: Njengemeko yokudibanisa apho isixa sesamente kunye nokubhibilika kulungiswe kwangaphambili, amanzi axutywayo anokwehliswa nge-18-28% xa exutywe ngekhonkrithi eyomeleziweyo kwi-0.5-1.0%.Ngokwezibalo, amandla oxinzelelo ngosuku loku-1, usuku lwe-3 kunye nomhla wama-28 emva kwesicelo esinye sonyuka nge-60-90% kunye ne-25-60% ngokulandelelanayo xa yongezwa kwi-dosage yokudibanisa okuqhelekileyo. Njengesiphumo, amandla oxinzelelo, amandla ,amandla okubopha kunye nemodyuli yokunwebeka kuya kuphuculwa ukuya kuthi ga kwinqanaba elithile.
3. Ukuphucula i-miscibility ye-concrete amalgamator ngamanzi kunye ne-collapsibility ngokunjalo.Njengemeko yokudibanisa okulinganayo, ukubola kunokunyuswa ngamaxesha angama-5-8 xa yongezwa kwi-0.75% ye-dosage ye-blend.
4. I-15-20% yesamente inokugcinwa xa i-ejenti ixutywe kwi-0.75% ye-dosage ye-blend, eyi-precondition nge-collapsibility efanayo kunye namandla.
(II)I-PARAMETERI&ICRITERA YOKWAMKELELA(SNF-A)
| into | ekujoliswe kuko | into | ekujoliswe kuko |
| Umxholo oqinileyo | ≥91％ | PH Ixabiso | 7; 9 |
| Na2SO4 | ＜5% | IGrout yesamente ecocekileyo ukuhambahamba | ≥250 mm |
| I-Chloride | ＜0.3% | Uxinzelelo lomphezulu | (70±1)×10-3N/ m |
(III)I-PARAMETERA&INQATHANGO YOKWAMMKELA(SNF-A YEREFREMENTI)
| Iiparamitha | Iikhrayitheriya | Okwenyani iziphumo | Iiparamitha | iikhrayitheriya | Okwenyani iziphumo | ||
| Ukucuthwa kwamanzi,% | ≥14 | ≥14 | Uxinzelelo amandla,% | 1d | ≥140 | 170 | |
| Ukungena kwamanzi,% | ≤90 | 79 | 3d | ≥130 | 160 | ||
| Isiqulatho somoya,% | ≤3.0 | 1.6 | 7d | ≥125 | 145 | ||
| Ukuhanjiswa kwexesha Kuseto(min) | yokuqala ixesha lokumisela | －90～ ＋120 | －90～ ＋120 | 28d | ≥120 | 135 | |
| Indawo yokukhwelela ixesha lokumisela | Ukuncipha | 28d | ≤135 | 82 | |||
| Ukonakala kwimivalo yentsimbi | akukho nanye | akukho nanye | |||||
| Qaphela:idosi yomxube oqhelekileyo:0.75%(njengesixa sesamente) | |||||||
SNF-B I-SUPERPLASTICIZER EPHAKAMILEYO
(I)IPROPATI,IIMPAWU&IIMPAWU(SNF-B)
- Imbonakalo:
Umgubo omdaka okhanyayo&ulwelo olumdaka omnyama.Ayinatyhefu, ayinavumba, ayinakutsha kwaye ayidleki kwiintsimbi zentsimbi.
- IPlastiki ephawulekayo: Njengemeko yokudityaniswa apho isixa sesamente kunye nokubhibilika kulungiswe kwangaphambili, amanzi axutywayo anokwehliswa nge-17-25% xa exutywe ngekhonkrithi eyomeleziweyo kwi-0.5-1.0%.Ngokwezibalo, amandla ocinezelo kwi-1stusuku, usuku lwe-3 kunye ne-28thUsuku emva kokufakwa kwesicelo esinye sonyuswa nge-60-95% kunye ne-25-50% ngokulandelelanayo xa yongezwa kwi-dosage yomxube oqhelekileyo. Njengesiphumo, amandla oxinzelelo, amandla okuqina, amandla okubamba kunye ne-madulus ye-elasticity iya kuphuculwa ukuya kwinqanaba elithile.
- Ukuphucula i-miscibility ye-concrete amalgamator ngamanzi kunye nokubola ngokunjalo.Njengemeko yokudibanisa okulinganayo, ukubola kunokunyuswa ngamaxesha e-4-7 xa idibaniswa kwi-0.75% ye-blend dosage.
- I-15-18% yesamente inokugcinwa xa i-arhente ixutywe kwi-0.75% yokudibanisa
idosi, engumqathango wangaphambili ngokuwa kunye nokomelela okufanayo.
(II)I-PARAMETERI&ICRITERA YOKWAMKELELA(SNF-B)
| into | ekujoliswe kuko | into | ekujoliswe kuko | |
| Umxholo oqinileyo | ≥91％ | PH | Ixabiso | 7; 9 |
| Na2SO4 | ＜10% | IGrout yesamente ecocekileyo | ≥240 mm | |
| ukuhambahamba | ||||
| I-Chloride | ＜0.4% | Uxinzelelo lomphezulu | (70±1)×10-3N/ m | |
(III)I-PARAMETERS&ICRRITERIA YOKWAMKELELA(FDN-B YEREFREMENTE)
| Iiparamitha | Iikhrayitheriya | Okwenyani iziphumo | Iiparamitha | iikhrayitheriya | Okwenyani iziphumo | ||
| Ukucuthwa kwamanzi,% | ≥14 | 17-25 | Uxinzelelo amandla,% | 1d | ≥140 | 165 | |
| Ukungena kwamanzi,% | ≤90 | 80 | 3d | ≥130 | 155 | ||
| Isiqulatho somoya,% | ≤3.0 | 1.6 | 7d | ≥125 | 140 | ||
| Ukuhanjiswa kwexesha Kuseto(min) | yokuqala ixesha lokumisela | －90～ ＋120 | －90～ ＋120 | 28d | ≥120 | 130 | |
| Indawo yokukhwelela ixesha lokumisela | Ukuncipha | 28d | ≤135 | 85 | |||
| Ukonakala kwimivalo yentsimbi | akukho nanye | akukho nanye | |||||
| Qaphela:idosi yomxube oqhelekileyo:0.75%(njengesixa sesamente) | |||||||
SNF-C I-SUPERPLASTICIZER EPHAKAMILEYO
(I)IPROPATI,IIMPAWU&IIMPAWU(SNF-C)
- Imbonakalo:
Umgubo omdaka okhanyayo&ulwelo olumdaka omnyama.Ayinatyhefu, ayinavumba, ayinakutsha kwaye ayidleki kwiintsimbi zentsimbi.
6. IPlastiki ephawulekayo: Njengemeko yokudibanisa apho isixa sesamente kunye nokudilika kulungiswe kwangaphambili, amanzi axutywayo anokwehliswa nge-16-22% xa ixutywe ngekhonkrithi eyomeleziweyo kwi-0.5-1.0%.Ngokwezibalo, amandla ocinezelo kwi-1stusuku, usuku lwe-3 kunye ne-28thUsuku emva kokuba isicelo esinye sonyuswe nge-60-95% kunye ne-25-40% ngokulandelelanayo xa idityaniswe kwi-dosage yomxube oqhelekileyo. Njengesiphumo, amandla oxinzelelo, amandla okuqina, amandla okugoba kunye ne-madulus ye-elasticity iya kuphuculwa ukuya kwinqanaba elithile.
7.Ukuphucula i-miscibility ye-concrete amalgamator ngamanzi kunye ne-collapsibility ngokunjalo.Njengemeko yokudibanisa okulinganayo, ukubola kunganyuswa ngamaxesha e-4-6 xa yongezwa kwi-0.75% ye-dosage ye-blend.
I-8.15-18% yesamente inokugcinwa xa i-arhente ixutywe kwi-0.75% yedosi ye-blend, eyi-precondition nge-collapsibility efanayo kunye namandla.
(II)I-PARAMETERI&ICRITERA YOKWAMKELELA(SNF-C)
| into | ekujoliswe kuko | into | ekujoliswe kuko | |
| Umxholo oqinileyo | ≥91％ | PH | Ixabiso | 7; 9 |
| Na2SO4 | ＜20% | IGrout yesamente ecocekileyo | ≥230 mm | |
| ukuhambahamba | ||||
| I-Chloride | ＜0.5% | Uxinzelelo lomphezulu | (70±1)×10-3N/ m | |
(III)I-PARAMETERA&INQATHANGO YOKWAMMKELA(SNF-C EKUBHEKISENI)
| Iiparamitha | Iikhrayitheriya | Okwenyani iziphumo | Iiparamitha | iikhrayitheriya | Okwenyani iziphumo | ||
| Ukucuthwa kwamanzi,% | ≥14 | 16-22 | Uxinzelelo amandla,% | 1d | ≥140 | 160 | |
| Ukungena kwamanzi,% | ≤90 | 85 | 3d | ≥130 | 150 | ||
| Isiqulatho somoya,% | ≤3.0 | 2.0 | 7d | ≥125 | 140 | ||
| Ukuhanjiswa kwexesha Kuseto(min) | yokuqala ixesha lokumisela | －90～ ＋120 | －90～ ＋120 | 28d | ≥120 | 125 | |
| Indawo yokukhwelela ixesha lokumisela | Ukuncipha | 28d | ≤135 | 88 | |||
| Ukonakala kwimivalo yentsimbi | akukho nanye | akukho nanye | |||||
| Qaphela:idosi yomxube oqhelekileyo:0.75%(njengesixa sesamente) | |||||||
(IV) UKUSETYENZISWA:
1.Idosi yokudibanisa kwi-0.5-1%, 0.75% yokuxuba idosi icetyiswa.2.Lungiselela izisombululo njengoko
efunekayo.
3.Ukusetyenziswa ngokuthe ngqo kwe-agent ye-powder kuvunyelwe.Kunye ukongezwa kwe-arhente kulandelwa yi-moisturization yamanzi (umlinganiselo wamanzi-samente: 60%).
4.I-arhente inokudityaniswa nezinye ii-arhente ezisetyenziswa ngokugqithisileyo ukuba uphuhliso olulingwayo okanye umfuniselo welabhoratri uyaphumelela.
(V)UKUPAKISHA, UKUGCINA NOKUTHUTHWA
1.package:
Umgubo: ukupakisha kwingxowa yelaphu eLukiweyo eneplastiki yangaphakathi.Ubunzima boNet:25kg±0.2kg okanye 650kg±0.2kg
2.Izilumkiso:
Ikhuselwe ekubeni yi-tom ngezinto ezibukhali ngelixa iipakethe zihanjiswa okanye zihanjiswa.Xa ingcoliswe kukufuma okuphezulu okanye ukufuma kwimeko yokuvuza, inokulungiswa ngeendlela ezimiselweyo ukuze isetyenziswe ngakumbi ngaphandle kokunikezela nayiphi na isiphumo.
3. Kufuneka igcinwe kwindawo enikezelweyo engena umoya kwaye yomile.Ukuba ichaphazeleka ngokufuma, yityumze nje okanye uyinyibilikise ibe yisisombululo ngaphandle kokusebenza kakubi.
